Model of HJ Lathe:           HJ-1100            HJ-1700

    Swing Over Bed                                 17”    
    Swing Over Cross Slide                  10 9/16”    
    Swing in Gap                                      24”    
    Distance Between Centers      43.5”                 67”
    Width of Bed                                       11.75"
    Length in front of face plate                5-7/8”
    Height of Center from Leg Bottom       42 3/8”    
    Spindle Bore                                        2.25”
    Taper of Spindle Bore & Center      M.T. #6 x #4
    Type of Spindle Nose                           D1-6    
    Number of Spindle Speed                       12
    Spindle Speed                                35-2000 RPM
    Number of Feed Changes                      16
    Feeds per Revolution Longitudinal    0.0012 – 0.034 inch
                                       Cross              0.0008 – 0.023 inch
    Diameter and pitch of lead screw       ø1 3/8”, 4 TPI
    Range of inch threads                        2-72 TPI (44)
    Range of metric pitches                     0.2 – 14mm (39 kinds)
    Maximum Travel of Compound          5-7/8"
    Maximum Travel of Cross Slide         10-2/5"
    Maximum Travel of Tailstock Quill      5-7/8”
    Tailstock Quill Diameter                      2-3/8”, #4
    Main Drive Motor                                7.5 HP
    Dimension    Floor Space            98” x 41”               120” x 41”
    Weight                                        3,820 lbs.                4,260 lbs.

    
    
Standard Equipment ~ included with the machine purchase: 

7.5 HP 1 speed motor for 220/440V, 3 phase, 60 cycle wiring
12 spindle speeds (35-2000 RPM)
2-1/4" spindle bore / Spindle nose D-1-6 Camlock
Headstock spindle center adaptor, MT#6 to MT#4
Ground steel centers for headstock and tailstock (MT#4)
Timing belt for gear changes
4-way tool post fitted to T-slotted compound
Hardened and ground bed ways and cross slide
Automatic longitudinal multiple feed stop
Halogen work light
Tool box with necessary wrenches and spanners
Instruction manual and parts list
10" 3 Jaw scroll chuck, BTC Brand D-1-6 with 2 piece top jaws  
Coolant system with pump and piping
Factory type Chuck guard, wrap around type, sheet metal design
4.7" steady rest with roller jaws
Full length splash guard
8" drive plate & 14” Face plate
Factory style chuck guard, split type, “now comes standard”